Cisco Nexus 7000 Series Reference Guide

Show Commands
show cfs status
443
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cfs status
To display the current state of Cisco Fabric Services (CFS), use the show cfs status command.
show cfs status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the current state of CFS:
switch# show cfs status
Distribution : Enabled
Distribution over IP : Enabled - mode IPv4
IPv4 multicast address : 239.255.70.83
IPv6 multicast address : ff15::efff:4653
Distribution over Ethernet : Disabled
Total number of entries = 8
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
show application_name
session status
Displays the CFS configuration session status for the application, including
the last action, the result, and the reason if there was a failure.
show cfs internal Displays information internal to CFS including memory statistics, event
history, and so on.
show cfs lock Displays all active CFS fabric locks.
show cfs merge status
name
Displays the merge status for a given CFS application.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English