Cisco Nexus 7000 Series Reference Guide

C Commands
clear hardware flow ip
57
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
clear hardware flow ip
To clear the NetFlow hardware IP flow, use the clear hardware flow ip command.
clear hardware flow ip [{{vdc vdc_id} | {monitor name} | {profile profile-id} | {vlan vlan-id} |
{interface if-type if-number}}] [instance inst] [force-export] [module num]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear the NetFlow hardware IP flow:
switch(config)# clear hardware flow ip module 8 ethernet 2/1
switch(config)#
vdc vdc_id Specifies the VDC. The range is from 1 to 16.
monitor name Specifies the name of the NetFlow flow monitor. The monitor name can be any
case-sensitive, alphanumeric string up to 64 characters.
profile
profile-id
Specifies the name of the flow profile. The range is from 1 to 31.
vlan vlan-id Specifies the VLAN. The range is from 1 to 4094.
interface Specifies the interface.
if-type Interface type. For more information, use the question mark (?) online help function.
if-number Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
instance inst (Optional) Specifies the EARL instance. The EARL instance can be any
alphanumeric string up to 32 characters.
force-export (Optional) Forces data to be exported to the collector prior to the clear operation.
module num (Optional) Specifies the module.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English