Cisco Nexus 7000 Series Reference Guide

E Commands
ethanalyzer local read
141
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ethanalyzer local read
To read packets captured by Ethanalyzer, use the ethanalyzer local read command. To stop reading the
packet capture, use the no form of this command.
ethanalyzer local read location
no ethanalyzer local read location
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines Cisco Ethanalyzer is based on the Wireshark open source code.
This command does not require a license.
Examples This example shows how to capture all packets on the mgmt 0 port:
switch# ethanalyzer local read bootflash:test-mgmt0
#
Related Commands
location Location to read captured packets from. The location can be any
case-sensitive, alphanumeric string up to 64 characters.
Release Modification
4.0(1) This command was introduced.
Command Description
ethanalyzer local
interface
Captures packets to or from the supervisor or mgmt0 port.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English