Cisco Nexus 7000 Series Reference Guide

Show Commands
show ntp pending peers
571
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp pending peers
To display pending Network Time Protocol (NTP) configuration changes on all peers, use the show ntp
pending peers command.
show ntp pending peers
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the pending NTP configuration changes on all peers:
switch# show ntp pending peers
switch#
Related Commands
Release Modification
4.1(1) This command was introduced.
Command Description
show ntp source Displays information about the NTP source.
show ntp peers Displays information about NTP peers.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English