Cisco Nexus 7000 Series Reference Guide

D Commands
diagnostic test simulation
130
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic test simulation
To simulate a diagnostic test for a module, use the diagnostic test simulation command
diagnostic test simulation module slot test test-id [port {number | all}] {fail | random-fail |
success}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to simulate a test result:
switch# diagnostic test simulation module 2 test 2 fail
switch#
slot Diagnostic test simulation module number. The range is from 1 to the number of
modules in the chassis.
test test-id Specifies the test ID. The range is from 1 to 15.
port (Optional) Specifies the interface port to display.
number Interface port number.
all Specifies all interface ports.
fail Displays failed test results.
random-fail Displays random fail test results.
success Displays pass test results.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English