Cisco Nexus 7000 Series Reference Guide

C Commands
clear flow exporter
54
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
clear flow exporter
To clear the statistics for a Flexible NetFlow flow exporter, use the clear flow exporter command.
clear flow exporter {name exporter-name | exporter-name}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow using an exporter before you
can use the clear flow exporter command.
This command does not require a license.
Examples This example clears the statistics for the flow exporter named NFC-DC-PHOENIX:
switch# clear flow exporter name NFC-DC-PHOENIX
switch#
Related Commands
name Specifies the name of a flow exporter.
exporter-name Name of an existing flow exporter.
Release Modification
4.0(1) This command was introduced.
Command Description
clear flow exporter Clears the statistics for exporters.
flow exporter Creates a flow exporter.
show flow exporter Displays flow exporter status and statistics.

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)