Cisco Nexus 7000 Series Reference Guide

S Commands
snmp-server community
373
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
snmp-server community
To configure the Simple Network Management Protocol (SNMP) community string, use the
snmp-server community command. To remove the community string, use the no form of this command.
snmp-server community name [group name | ro | rw]
no snmp-server community name [group name | ro | rw]
Syntax Description
Defaults The default community access is read-only (ro).
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines Use the snmp-server community command to configure read-only or read-write access to the SNMP
agent on the device. You can optionally configure the community for an access group or user role. For
more information on user roles, see the Cisco Nexus 7000 Series NX-OS Security Configuration Guide,
Release 6.x.
This command does not require a license.
Examples This example shows how to configure a read-only SNMP community:
switch# configure terminal
switch(config)# snmp-server community test ro
name SNMP community string. The name can be any alphanumeric string up to 32
characters.
group name (Optional) Specifies the group name to which the community belongs. The name
can be any alphanumeric string up to 32 characters.
ro (Optional) Sets read-only access for this community.
rw (Optional) Sets read-write access for this community.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English