Cisco Nexus 7000 Series Reference Guide

Show Commands
show monitor session
559
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show monitor session
To display information about an Ethernet Switched Port Analyzer (SPAN) or a Encapsulated Remote
Switched Port Analyzer (ERSPAN) session for analyzing traffic between ports, use the show monitor
session command.
show monitor session {all | session_number | range session_range} [brief]
Syntax Description
Defaults Displays a brief summary of information for all configured SPAN or ERSPAN sessions.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information for all configured ERSPAN sessions:
switch(config)# show monitor session 2
session 2
---------------
type : erspan-source
state : up
erspan-id : 100
vrf-name : default
acl-name : acl-name not specified
ip-ttl : 255
ip-dscp : 0
destination-ip : 10.1.1.2
all Displays information about all SPAN or ERSPAN sessions.
session_number Specified SPAN or ERSPAN session number.
range session_range Displays information about the specified range of SPAN or ERSPAN
sessions.
brief (Optional) Displays a brief summary of the information for the specified
SPAN or ERSPAN session.
Release Modification
6.1(1) Changed the command output for ERSPAN-source sessions.
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English