Cisco Nexus 7000 Series Reference Guide

D Commands
destination-profile alert-group
111
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
destination-profile alert-group
To specify which alerts a Call home destination will receive, use the destination-profile alert-group
command. To remove an alert group, use the no form of this command.
destination-profile profile_name alert-group {All | Configuration | Diagnostic | EEM |
Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware |
Supervisor-Hardware | Syslog-group-port | System | Test}
no destination-profile profile_name alert-group {All | Configuration | Diagnostic | EEM |
Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware |
Supervisor-Hardware | Syslog-group-port | System | Test}
Syntax Description
Defaults None
Command Modes Call home configuration (config-callhome)
profile_name User-defined Call home destination profile name.
alert-group Adds an alert group to the specified Call home destination profile.
All Specifies that the Call home destination profile receives all callhome messages.
Configuration Specifies that the Call home destination profile is notified of events related to
configuration.
Diagnostic Specifies that the Call home destination profile is notified of events related to
the diagnostic.
EEM Specifies that the Call home destination profile is notified of EEM events.
Cisco-TAC Specifies that the Call home destination profile is notified of events that are
meant for Cisco TAC only.
Environmental Specifies that the Call home destination profile is notified of events related to
power, fan, and temperature.
Inventory Specifies that the Call home destination profile is notified of inventory status
events.
License Specifies that the Call home destination profile is notified of events related to
licensing.
Linecard-
Hardware
Specifies that the Call home destination profile is notified of line card-related
events.
Supervisor-
Hardware
Specifies that the Call home destination profile is notified of supervisor-related
events.
Syslog-group-port Specifies that the Call home destination profile is notified of events related to
syslog messages filed by port manager.
System Specifies that the Call home destination profile is notified of software-related
events.
Test Specifies that the Call home destination profile is notified of user-generated
test events.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English