Cisco Nexus 7000 Series Reference Guide

Show Commands
show sprom
650
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show sprom
To display the contents of the serial PROM (SPROM) on the device, use the show sprom command.
show sprom {all | backplane bp-number | clock clock-number | cmp | fan fan-number | module slot
| powersupply ps-number | stby-sup | sup | xbar xbar-number}
Syntax Description
Defaults Displays summary information for all processes on the device.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines The SPROM on the physical device components contain detailed information about the hardware,
including the serial number, part number, and revision numbered.
This command does not require a license.
all Displays the SPROM contents for all components on the physical device.
backplane bp-number Displays the SPROM contents for a backplane.
clock clock-number Displays the SPROM contents for a clock module.
cmp Displays the SPROM contents for a Connectivity Management Processor
(CMP).
fan fan-number Displays the SPROM contents for a fan.
module slot Displays the SPROM contents for a I/O module.
powersupply ps-number Displays the SPROM contents for a power supply.
stby-sup Displays the SPROM contents for the standby supervisor module.
sup Displays the SPROM contents for the active supervisor module.
xbar xbar-number Displays the SPROM contents for a fabric module.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English