Cisco Nexus 7000 Series Reference Guide

Show Commands
show ntp statistics
577
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp statistics
To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.
show ntp statistics {io | local | memory | peer {ipaddr address | name name1 [..namen]}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to displays statistics for NTP:
switch(config)# show ntp statistics local
Related Commands
io Displays the input-output statistics.
local Displays the counters maintained by the local NTP.
memory Displays the statistics counters related to the memory code.
peer Displays the per-peer statistics counter of a peer.
ipaddr address Displays statistics for the peer with the configured IPv4 or IPv6 address. The IPv4
address format is dotted decimal, x.x.x.x. The IPv6 address format is hex A:B::C:D.
name name Displays statistics for one or more named peers.
Release Modification
4.0(1) This command was introduced.
Command Description
clear ntp statistics Clears NTP statistics.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English