Cisco Nexus 7000 Series Reference Guide

Show Commands
show flow interface
479
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show flow interface
To display the Flexible NetFlow configuration and status for an interface, use the show flow interface
command.
show flow interface [interface-type number]
Syntax Description
Defaults Information for the Flexible NetFlow accounting configuration on the interface is displayed.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show
flow interface command.
This command does not require a license.
Examples This example shows how to display the Flexible NetFlow accounting configuration on interface Ethernet
0/0 and 0/1:
switch# show flow interface ethernet 1/0
Interface Ethernet1/0
FNF: monitor: NFC-DC-PHOENIX
direction: Output
traffic(ip): on
switch# show flow interface ethernet 0/0
Interface Ethernet0/0
FNF: monitor: FLOW-MONITOR-1
direction: Input
traffic(ip): sampler SAMPLER-2#
interface-type number (Optional) Type of interface that you want to view Flexible NetFlow
accounting configuration information on.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English