Cisco Nexus 7000 Series Reference Guide

Show Commands
show snmp trap
646
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show snmp trap
To display the Simple Network Management Protocol (SNMP) notification enable status, use the show
snmp trap command.
show snmp trap
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the SNMP notification enable status:
switch(config)# show snmp trap
Trap type Enabled
--------- -------
aaa server state-change No
callhome No
entity fru Yes
license Yes
snmp authentication No
vrrp No
link No
bridge topologychange No
bridge newroot No
stpx inconsistency No
stpx loop-inconsistency No
stpx root-inconsistency No
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English