Cisco Nexus 7000 Series Reference Guide

S Commands
snmp-server aaa-user cache-timeout
372
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
snmp-server aaa-user cache-timeout
To configure the Simple Network Management Protocol (SNMP) time-out value for synchronized AAA
users, use the snmp-server aaa-user cache-timeout command. To revert to the default settings, use the
no form of this command.
snmp-server aaa-user cache-timeout seconds
no snmp-server aaa-user cache-timeout seconds
Syntax Description
Defaults 3600 seconds
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the AAA user synchronization timeout value:
switch# configure terminal
switch(config)# snmp-server aaa-user cache-timeout 6000
Related Commands
seconds Timeout value, in seconds. The range is from 1 to 86400.
Release Modification
4.0(3) This command was introduced.
Command Description
show snmp Displays information about SNMP.

Cisco Nexus 7000 Series Specifications

General

Brand	Cisco
Model	Nexus 7000 Series
Category	Switch
Language	English