PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
5
Delivery condition of the system
Overview
The PCU has onboard interfaces for communicating via Ethernet, MPI and PROFIBUS DP.
The integrated free slots remain free for other tasks. The PCU is equipped with the
Windows XP ProEmbSys operating system and for data backup tasks with the Symantec
Ghost software.
Interfaces:
● Four USB ports (USB 2.0) offer points where a keyboard, mouse and other peripheral
devices can be connected.
● For CF cards, there is a covered slot.
● Two internal PCI slots are available for specific expansions.
For commissioning:
● Two 7-segment displays and two LEDs are integrated for diagnostic purposes. They
indicate the current operating status and display the BIOS error codes during startup.
● If the PCU is to be operated without an operator panel front, a monitor and an additional
keyboard will also be required:
– For diagnostics during startup of the PCU.
– When installing a replacement hard disk
(alternatively, the hard disk can also be installed externally).
Operator Components and Networking Manual
To Next Page
Loading...
Need help?
General
