Siemens SINUMERIK 840DE SL Commissioning Manual

Commissioning the system
1.4 BIOS settings for PCU 50.3
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
33
1.4
BIOS settings for PCU 50.3
Overview
The BIOS of the PCU is preset in such a way that no changes are required. The date and
time can be set under Windows or the user interface.
Note
Changes in the BIOS
Your device configuration is preset for working with the software supplied with the unit.
You should only change the preset values if you have modified your device in any way, or if
a fault oc
curs when the unit is powered up.
Starting BIOS setup
1. Start the BIOS SETUP as follows:
Reset the device (warm or cold restart).
After the startup test, the following message appears:
Press < F2 > to enter SETUP or <ESC> to show boot menu
2. Press the F2 key as long as the BIOS prompt appears on the screen.
The BIOS main menu opens:
Figure 1-15 BIOS Main Menu (Example)

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English