Siemens SINUMERIK 840DE SL Commissioning Manual

6.6 Restore a disk image of the SSD
If your system is no longer functioning stably, you can restore it with a disk image.
Note
Restoring replaces all current files
When you restore the PC system from a disk image, all programs, settings and files are
completely replaced by the disk image. You cannot restore individual files or exclude individual
files from restoration.
Requirement
A disk image exists
See: Create a disk image of the SSD (Page 128)
Procedure
To restore a disk image, proceed as follows:
1. Start the Service Center, e.g. via the Windows boot menu.
See also: Starting the Service Center (Page 122)
2. In the main menu of the Service Center, click "Disk Restore".
The "Disk Restore" dialog box opens.
Figure 6-5 Service Center - Disk Restore
Backing up and restoring data
6.6 Restore a disk image of the SSD
PCU Base Software (IM10)
130 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English