EasyManuals Logo
Home>AMX>Recording Equipment>TPI-PRO-DVI-2

AMX TPI-PRO-DVI-2 User Manual

AMX TPI-PRO-DVI-2
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Cable Details and Pinout Information
20
TPI-PRO-DVI - Instruction Manual
DVI-A Male to 5-BNC Male Cable
NOTE: This cable type corresponds to the CC-DVI-5BNCM DVI-to-Component cable (FG10-2170-08), available from AMX.
Cable to be composed of:
Five 75ohm 28 AWG mini-coax cables for the Red, Green, Blue, VSync and HSync signals and returns
EMI shield metal can on DVI connector
DVI-to-5-BNC Cable Pinout Information
DVI-to-5-BNC Cable Pinout Information
DVI-A
Connector Pin
Signal Name Signal Name BNC connector pin Notes:
1 TMDS DATA 2 N Pin populated in DVI-A connector, but not
connected for this cable
2 TMDS DATA 2 P Pin populated in DVI-A connector, but not
connected for this cable
3 TMDS SHIELD 2/4 Pin not populated in DVI-A connector
4 TMDS DATA 4 N Pin not populated in DVI-A connector
5 TMDS DATA 4 P Pin not populated in DVI-A connector
6 DDC CLOCK Pin populated in DVI-A connector, but not
connected for this cable
7 DDC DATA Pin populated in DVI-A connector, but not
connected for this cable
8 ANALOG VERTICAL SYNC VSync Signal Black BNC center pin
9 TMDS DATA 1 N Pin not populated in DVI-A connector
10 TMDS DATA 1 P Pin not populated in DVI-A connector
11 TMDS SHIELD 1/3 Pin not populated in DVI-A connector
12 TMDS DATA 3 N Pin not populated in DVI-A connector
13 TMDS DATA 3 P Pin not populated in DVI-A connector
14 +5VDC Pin populated in DVI-A connector, but not
connected for this cable
15 GROUND VSync, HSync
Returns (shields)
Black/Grey BNC
shields
16 HOT PLUG DETECT Pin populated in DVI-A connector, but not
connected for this cable
17 TMDS DATA 0 N Pin populated in DVI-A connector, but not
connected for this cable
18 TMDS DATA 0 P Pin populated in DVI-A connector, but not
connected for this cable
19 TMDS SHIELD 0/5 Pin not populated in DVI-A connector
20 TMDS DATA 5 N Pin not populated in DVI-A connector
21 TMDS DATA 5 P Pin not populated in DVI-A connector
22 TMDS CLOCK SHIELD Pin not populated in DVI-A connector
23 TMDS CLOCK P Pin populated in DVI-A connector, but not
connected for this cable
24 TMDS CLOCK N Pin populated in DVI-A connector, but not
connected for this cable
C1 C1 ANALOG RED Red Signal Red BNC center pin
C2 C2 ANALOG GREEN Green Signal Green BNC center pin
C3 C3 ANALOG BLUE Blue Signal Blue BNC center pin
C4 C4 ANALOG HSYNC HSync Signal Grey BNC center pin
C5 C5 ANALOG GROUND Red, Green, Blue
Returns (shields)
Red/Green/Blue BNC
shields
BACKSHELL SHIELD Pin populated in DVI-A connector, but not
connected for this cable

Table of Contents

Other manuals for AMX TPI-PRO-DVI-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AMX TPI-PRO-DVI-2 and is the answer not in the manual?

AMX TPI-PRO-DVI-2 Specifications

General IconGeneral
BrandAMX
ModelTPI-PRO-DVI-2
CategoryRecording Equipment
LanguageEnglish

Related product manuals