EasyManuals Logo
Home>AMX>Recording Equipment>TPI-PRO-DVI-2

AMX TPI-PRO-DVI-2 User Manual

AMX TPI-PRO-DVI-2
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Cable Details and Pinout Information
23
TPI-PRO-DVI - Instruction Manual
DVI-A Male to HD15 (VGA) Male Cable
NOTE: This cable type corresponds to the CC-DVIM-VGAF DVI-to-VGA cable (FG10-2170-13), available from AMX.
Cable to be composed of:
Three 75ohm 28 AWG mini-coax cables for the Red, Green and Blue signals and returns
Seven UL1589 (28AWG) for VSYNC, HSYNC, DDC_CLK, DDC_DATA, Hot_Plug_Detect, +5VDC and GROUND
The above bundles jacketed together in aluminum foil shield and 85% (minimum) braid
EMI shield metal can on both DVI and HD15 connectors and connected to braid
DVI-to-VGA Cable Pinout Information
DVI-to-VGA Cable Pinout Information
DVI-A
Connector Pin
Signal
Name
Signal
Name
HD15 (VGA)
Pin
Notes:
1 TMDS DATA 2 N Pin populated in DVI-A connector, but not connected for this
cable
2 TMDS DATA 2 P Pin populated in DVI-A connector, but not connected for this
cable
3 TMDS SHIELD 2/4 Pin not populated in DVI-A connector
4 TMDS DATA 4 N Pin not populated in DVI-A connector
5 TMDS DATA 4 P Pin not populated in DVI-A connector
6 DDC CLOCK DDC CLOCK 15 28AWG
7 DDC DATA DDC DATA 12 28AWG
8 ANALOG VERTICAL
SYNC
VSYNC Signal 14 28AWG
9 TMDS DATA 1 N Pin not populated in DVI-A connector
10 TMDS DATA 1 P Pin not populated in DVI-A connector
11 TMDS SHIELD 1/3 Pin not populated in DVI-A connector
12 TMDS DATA 3 N Pin not populated in DVI-A connector
13 TMDS DATA 3 P Pin not populated in DVI-A connector
14 +5VDC +5VDC 9 28AWG
15 GROUND GND, HS Return 5 28AWG
16 HOT PLUG DETECT +5VDC 9 28AWG
17 TMDS DATA 0 N Pin populated in DVI-A connector, but not connected for this
cable
18 TMDS DATA 0 P Pin populated in DVI-A connector, but not connected for this
cable
19 TMDS SHIELD 0/5 Pin not populated in DVI-A connector
20 TMDS DATA 5 N Pin not populated in DVI-A connector
21 TMDS DATA 5 P Pin not populated in DVI-A connector
22 TMDS CLOCK SHIELD Pin not populated in DVI-A connector
23 TMDS CLOCK P Pin populated in DVI-A connector, but not connected for this
cable
24 TMDS CLOCK N Pin populated in DVI-A connector, but not connected for this
cable
C1 C1 ANALOG RED RED Coax
Signal
1Red mini-coax signal
C2 C2 ANALOG GREEN GREEN Coax
Signal
2 Green mini-coax signal
C3 C3 ANALOG BLUE BLUE
Coax Signal
3Blue mini-coax signal
C4 C4 ANALOG HSYNC HSYNC Signal 13 28AWG
C5 C5 ANALOG GROUND RGB Coax,
VSync/DDC
Returns
6, 7, 8, 10, 11 Red, Green, Blue mini-coax returns; VSync/DDC return; NC used
as GND
BACKSHELL Braided Shield Braided Shield BACKSHELL Outer braid, tied to 6, 7, 8, 10, 11

Table of Contents

Other manuals for AMX TPI-PRO-DVI-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AMX TPI-PRO-DVI-2 and is the answer not in the manual?

AMX TPI-PRO-DVI-2 Specifications

General IconGeneral
BrandAMX
ModelTPI-PRO-DVI-2
CategoryRecording Equipment
LanguageEnglish

Related product manuals