BMW iX User Manual

Operating requirements
The driver has registered in the vehicle with a
BMW ID.
Activating parking service mode
1. "MENU"
2. "Vehicle apps"
3. "System settings"
4. "Valet parking mode"
5. If necessary, "PIN"
If the active BMW ID does not have an as‐
signed PIN, enter this PIN now. The PIN is
needed to deactivate the parking service
mode.
6. If necessary, enter the PIN.
7. "Activate valet parking mode"
Deactivating parking service mode
1.
Select the desired BMW ID on the lock
screen.
2.
▷ Enter the assigned PIN for the BMW ID.
If PIN was forgotten: enter access data for
the BMW ID.
▷ If the selected BMW ID does not have an
assigned PIN: enter access data for the
BMW ID.
Settings
General
Various settings are possible for opening and
closing, depending on the equipment and the
national-market version.
Unlocking and locking
Doors
1.
"MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock"
6. Select the desired setting:
▷ "Driver's door only"
Only the driver's door and charging
socket flap are unlocked. Pressing again
unlocks the entire vehicle.
▷ "All doors"
The entire vehicle is unlocked.
Touchless unlocking/locking
1.
"MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Comfort access"
5. Select the desired setting:
▷ "Unlock when approaching"
▷ "Lock when walking away"
Automatic unlocking
1.
"MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock doors at end of journey"
After drive-ready state has been switched off
by pressing the Start/Stop button, the locked
vehicle is automatically unlocked.
Automatic locking
1.
"MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Lock after a short time"
The vehicle is automatically locked again after
a short while if no doors are opened after un‐
locking.
Seite 107
Opening and closing
CONTROLS
107
Online Edition for Part no. 01405A38CB9 - VI/21

BMW iX Specifications

General

Brand	BMW
Model	iX
Category	Automobile
Language	English