Engaging selector lever position R, N, D,
B
▷ R reverse gear.
▷ N Neutral.
▷ D drive position.
▷ B drive position.
Apply the brake until ready to drive off, otherwise
the vehicle will move when drive position or re‐
verse gear is selected.
With the driver's seat belt fastened, briefly tap
the selector lever in the desired direction, be‐
yond a resistance point if required. The selector
lever returns to the centre position in each case.
The selector lever will only move from position P
to another selector lever position if drive-ready
state is switched on and the brake is pressed.
It may not be possible to move out of selector
lever position P until all technical conditions are
met.
Before shifting out of selector lever position P,
remove the charging cable from the vehicle; oth‐
erwise, the gearshift request will not be execu‐
ted.
Only engage selector lever position R when the
vehicle is stationary.
Selector lever position B is a drive position with a
high recuperation. In selector lever position B,
the vehicle will decelerate more than in selector
lever position D when coasting.
Changing between selector lever position D and
B: pull selector lever to D/B.
Engaging selector lever position P
Press the button.
The transmission lock is engaged and the park‐
ing brake is engaged.
Accelerator pedal positions, displays
1 Deceleration, energy recuperation
2 Rolling
3 Acceleration or constant speed: ePOWER
Parking brake
Applying the parking brake
Press the button.
The LED on the button and the indicator
light in the instrument cluster are illumi‐
nated.
The parking brake is applied and transmission
lock is engaged.
Seite 35
On the move
QUICK REFERENCE
35
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
