Removing covers
The cover can be removed for stowing bulky
items.
Cover in the luggage compartment
Pull cover backwards out of brackets on sides.
Cover in the tailgate
1.
Open the tailgate.
2. Release cover on both sides.
3. Raise the cover slightly and remove it to the
rear.
Inserting covers
To insert, proceed in reverse order. Make sure
that the luggage compartment covers are posi‐
tioned correctly in the brackets and that they are
engaged.
Cover in the luggage compartment:
1.
Put on cover on the left and right.
2. Lift cover slightly at rear and push forwards
until it engages in both side brackets.
Cover in the tailgate:
1. Insert cover into the brackets at the top.
2. Engage cover on the bottom on both sides in
the brackets.
Luggage compartment partition
net
General
The luggage compartment partition net can be
installed in two different positions in the vehicle.
With the rear seat backrest folded
down
1.
Fold down the rear seat backrests.
Expand the luggage compartment, see
page 307.
2. Fold up the front cover caps on the roof
frame at the top until they lock into place.
3. Insert both upper fastening pins of the lug‐
gage compartment partition net into the hold‐
ers as far as they will go, arrow 1, and slide
Seite 309
Luggage compartment
CONTROLS
309
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
