Functional requirement of the
cameras
The areas of the cameras are clean and clear.
For further information:
▷ Washing the vehicle, see page 375.
▷ Vehicle care, see page 376.
System limits of the cameras
The function of the cameras can be restricted or
may indicate something wrong, for example in
the following situations:
▷ In thick fog, wet conditions or snow.
▷ On steep crests or dips or on tight bends.
▷ When the camera field of view is covered, for
example by a fogged up windscreen or labels.
▷ If the camera lens is dirty or damaged.
▷ With the exterior mirrors folded in.
▷ With open doors or open luggage compart‐
ment.
▷ In the case of bright oncoming light or strong
reflections, for example if the sun is low in the
sky.
▷ In the dark.
▷ The camera has overheated due to excessive
temperatures and temporarily turned off.
▷ During the camera calibration process imme‐
diately after vehicle delivery.
A Check Control message may be displayed if
the system limits are reached.
Radar sensors
Front radar sensor
The radar sensor is located in the area shown.
Side radar sensors, front
The radar sensors are located in the areas
shown.
Side radar sensors, rear
The radar sensors are located in the areas
shown.
Seite 49
Sensors in the vehicle
CONTROLS
49
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
