General
Sensors record the traffic situation.
Vehicles that cross the vehicle's direction of
travel can be detected by the system as soon as
these vehicles enter the detection range of the
system.
A warning is given at road junctions and cross‐
roads if there is a risk of collision with crossing
traffic.
The system issues a warning of a possible risk of
collision with vehicles at speeds above approx.
5 km/h/3 mph. The timing of these warnings may
vary depending on the current driving situation.
For further information:
Front-collision warning, see page 189.
Safety notes
Follow the Safety Information in Chapter “Front-
collision warning”.
Display in the instrument cluster
A warning symbol is displayed when a collision
with a detected vehicle is imminent.
Icon Meaning
Risk of collision with crossing vehicle
from right.
Risk of collision with crossing vehicle
from left.
General risk of collision.
Warning function
The warning prompts the driver to intervene per‐
sonally.
For further information:
Front-collision warning, see page 189.
System limits
General
The system limits and functional limitations of
the Front-collision warning apply.
Safety note
WARNING
The system may not respond at all, or may re‐
spond too late, incorrectly or without justifica‐
tion due to system limitations. There is a risk of
accident or material damage. Observe the in‐
formation on the system limits and intervene
actively if necessary.
Upper speed limit
The system reacts to crossing vehicles if your
own speed is below approx. 80 km/h, 50 mph.
Detection range
The detection capability of the system is limited.
Only objects within the detection range and that
are detected by the system are taken into ac‐
count.
For example the following might not be detected:
Seite 198
CONTROLS
Safety
198
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
