Icon Description
Low energy recuperation.
Selector lever position D is en‐
gaged.
Medium energy recuperation.
Selector lever position D is en‐
gaged.
High energy recuperation.
Selector lever position D or B is
engaged.
Adaptive recuperation is activa‐
ted.
Adaptive recuperation, see
page 318.
Standby state and drive-ready
state
OFF in the instrument cluster in‐
dicates that drive-ready state is
switched off and standby state is
switched on.
READY indicates drive-ready
state.
For further information:
Vehicle operating condition, see page 52.
Outside temperature
General
If the display drops to +3 ℃/+37 ℉ or lower, a
signal sounds.
A Check Control message is shown.
There is an increased risk of black ice.
Safety note
WARNING
Even at temperatures above +3 ℃/+37 ℉
there may be an increased risk of black ice, for
example on bridges or on shaded sections of
road. There is a risk of accident. At low temper‐
atures, adjust driving style to the weather con‐
ditions.
Range
General
The anticipated range for the energy stored in
the high-voltage battery is permanently displayed
in the instrument cluster.
Always ensure that the range is sufficient for the
planned trip. The range is dynamic and may
change abruptly.
The range can be reduced or increased based
on the following factors:
▷ Driving style.
▷ Traffic conditions.
▷ Drive mode change via My Modes.
▷ Climate and terrain conditions.
▷ Settings of the automatic air conditioning.
▷ After a route has been calculated by the navi‐
gation system, depending on the route pro‐
file, the route length and the selected speed.
▷ When leaving a route or recalculating a route.
Information about the current range can be dis‐
played in the instrument cluster.
Check Control messages alert you when the
range is low.
For further information:
▷ Range prediction, see page 154.
▷ Increasing the range, see page 317.
Seite 164
CONTROLS
Displays
164
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
