Rubber parts
The surfaces of rubber parts can be contamina‐
ted or lose their shine due to environmental influ‐
ences. Only use water and suitable care prod‐
ucts for cleaning.
Rubber parts subjected to high wear and tear
should be treated regularly with rubber care
products. Do not use silicone-based care prod‐
ucts for treating rubber seals, otherwise these
could be damaged and become a source of
noise.
Fine wood parts
Clean fine wood trims and fine wood parts with a
damp cloth only. Then dry them with a soft cloth.
Kenaf
Treat parts made from kenaf fibres with a suita‐
ble care product only.
Plastic parts
NOTE
Cleaning agents containing alcohol or solvents,
for example nitro thinners, cold cleaners, fuel or
similar can damage plastic parts. There is a risk
of material damage. Clean with a microfibre
cloth. Lightly moisten the cloth with water if
necessary.
Clean with a microfibre cloth.
Lightly moisten the cloth with water if necessary.
Do not soak the headliner.
Seat belts
WARNING
Chemical cleaners can cause irreparable dam‐
age to the fabric of the seat belts. The protec‐
tive function of the seat belts will be lost. There
is a risk of injury or even death. Only use a mild
soap and water solution for cleaning the seat
belts.
Dirt on the seat belt straps can interfere with the
action of the reel and is a safety hazard.
Only clean the seat belt straps with a mild soap
solution while still fitted to the vehicle.
Do not allow seat belts to retract until they are
dry.
Carpets and floor mats
WARNING
Objects in the driver's footwell can restrict the
pedal travel or block a pedal that has been
pressed. There is a risk of accident. Ensure that
items in the vehicle are stowed securely and
cannot get into the driver's footwell. Only use
floor mats that are suitable for the vehicle and
can be securely fastened to the floor. Do not
use loose floor mats, and do not place several
floor mats on top of one another. Make sure
that there is sufficient space for the pedals. En‐
sure that floor mats are securely reattached af‐
ter removal, for example for cleaning.
Floor mats can be removed from the vehicle to
enable the interior to be cleaned more thor‐
oughly.
In the event of heavy soiling, clean floor carpets
using a microfibre cloth and water or textile
cleaner. Rub back and forth in the direction of
travel to prevent matting.
Displays, screens and protective glass of
the Head-up display
NOTE
Chemical cleaners, moisture or fluids of all
kinds can damage the surface of displays and
screens. There is a risk of material damage.
Clean with a clean, anti-static microfibre cloth.
Seite 378
MOBILITY
Care
378
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
