When leaving parallel parking spaces, the vehicle
manoeuvres automatically until the vehicle rea‐
ches a position in which the driver can drive out
of the parking space without further steering
movements.
When leaving bay parking spaces, the vehicle is
manoeuvred completely out of the parking space
to enable continued driving in the desired direc‐
tion.
Safety notes
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the traffic situa‐
tion correctly. Due to system limits, it cannot
respond independently and appropriately in all
traffic situations. There is a risk of accident.
Adapt your driving style to the traffic conditions.
In addition, look directly to check the traffic sit‐
uation and the vehicle surroundings and inter‐
vene actively where appropriate.
NOTE
The system can steer the vehicle over or onto
kerbs. There is a risk of material damage. Ob‐
serve the traffic situation and intervene actively
if the situation warrants it.
The safety information for Park Distance Control
PDC also applies.
For further information:
Park Distance Control, PDC, see page 253.
Overview
Sensors
The Parking Manoeuvre Assistant is controlled
by the following sensors:
▷ Ultrasonic sensors in the front/rear bumpers.
▷ Side ultrasonic sensors.
The Parking Manoeuvre Assistant Professional is
additionally controlled by the following cameras:
▷ Front camera.
▷ Exterior mirror camera.
▷ Reversing Assist Camera.
Operating requirements
Measurement of parking spaces
▷ Driving forwards in a straight line up to a max‐
imum speed of approximately 35 km/h,
22 mph.
▷ Maximum distance from the row of parked
vehicles: 1.5 m, 5 ft.
Suitable parking space
General:
▷ Gap behind an object which is at least 0.5 m,
1.7 ft long.
▷ Gap between two objects, each at least
0.5 m, 1.7 ft long.
▷ Minimum length of adjoining objects approx.
1 m/3 ft.
Parking parallel to the road:
▷ Minimum length of gap between two objects:
own vehicle length plus approximately 0.8 m,
2.6 ft.
▷ Minimum depth: approximately 1.5 m, 5 ft.
Bay parking:
▷ Minimum width of gap: own vehicle width
plus approximately 0.7 m, 2.3 ft.
▷ Minimum depth: own vehicle length.
The depth of bay parking spaces must be es‐
timated by the driver. Due to technical limits,
the system is only able to gauge the depth of
bay parking spaces approximately.
Parking lines:
Parking space must be clearly marked with lines.
Seite 267
Parking
CONTROLS
267
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
