Seats for child restraint systems
Vehicle equipment
This chapter describes equipment, systems and
functions which are offered or will be offered on
a model-specific basis, even if they are not inclu‐
ded in the vehicle in question.
For further information:
Vehicle equipment, see page 7.
Information for manufacturers
of child seats
General
Information about which child restraint systems
can be used on each seat, in accordance with
the ECE-R 16 and ECE-R 129 standard.
Left-hand drive vehicles: Suitability of child restraint systems for each vehicle
seat
Seat position 1 3 - Airbag
ON
3 - Airbag
OFF
4 5 6
Seat position suitable for
universal fastening with
a belt.
No No Yes Yes Yes Yes
i-Size seat position. No No No Yes No Yes
Seat position suitable for
side mounting: L1/L2.
No No No Yes No Yes
Largest rear-facing
mounting: R1/R2X/R2/R
3.
No No No R3 No R3
Largest front-facing
mounting: F2X/F2/F3.
No No No F3 No F3
Largest suitable booster
mount: B2/B3.
No No No B3 No B3
A seat position without i-Size approval is not compatible with an i-Size support stand.
A seat position with lower ISOFIX anchors, but with no Top Tether, is not available.
There are no seat belt buckles for adults between the two bottom ISOFIX anchors.
Seat number Position in the vehicle
1 Front left
2 Front centre
Seat number Position in the vehicle
3 Front right
4 Second-row seating left
Seite 382
REFERENCE
Seats for child restraint systems
382
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
