Turning on the Crossing-traffic
Warning automatically
If the system was activated on the control dis‐
play, it is automatically turned on as soon as the
Park Distance Control PDC or a camera view is
active and a selector lever position is engaged.
The system is switched on at the rear when re‐
verse gear is engaged.
Depending on the equipment, the front system is
turned on when a drive position is engaged.
Depending on the national-market version, the
system is automatically active when the vehicle
is started.
Turning off the Cross-traffic Warning
automatically
The system is automatically turned off, for exam‐
ple, in the following situations:
▷ If walking speed is exceeded.
▷ When a certain distance covered is excee‐
ded.
Warning function
General
The control display shows the corresponding im‐
age, an acoustic signal sounds, if necessary, and
the light in the exterior mirror flashes.
Visual warning
Light in the exterior mirror
The light in the exterior mirror flashes if other ve‐
hicles are detected by the rear sensors when the
vehicle is reversing.
Display in the Park Distance Control PDC view
In the Park Distance Control PDC view, the rele‐
vant boundary area flashes red if the sensors de‐
tect vehicles.
Seite 277
Parking
CONTROLS
277
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
