Adapt your driving style to the traffic conditions.
In addition, look directly to check the traffic sit‐
uation and the vehicle surroundings and inter‐
vene actively where appropriate.
Operating requirements
▷ Drive forward to store the distance covered.
▷ To store the distance covered, do not drive
faster than 35 km/h/22 mph.
▷ No trailer operation.
▷ Sufficiently bright light conditions on the
stored distance covered.
▷ The cameras on the vehicle must be clean
and clear.
Reversing with automated steering
1.
Switch on drive-ready state.
2. Press the button when the vehicle is
stationary.
3. "Start Reversing Assistant"
The length of the distance covered is dis‐
played on the control display and in the in‐
strument cluster.
4. Engage reverse gear.
If applicable, follow the instructions on the
control display or in the instrument cluster.
5. Take your hands off the steering wheel and
carefully drive in reverse with the accelerator
pedal and the brake. The system takes con‐
trol of the steering.
When driving in reverse, observe the vehicle
surroundings.
In case of obstacles, stop immediately and
take over control of the vehicle. Pay attention
to the information on Park Distance Control
PDC.
6. Right before the end of the stored distance
covered, an acoustic signal will sound and a
message is displayed.
Stop when you reach normal road traffic at
the latest and take over control of the vehicle,
for example by engaging a forward gear.
Cancelling the Reversing Assistant
manually
The assisted reversing by the Reversing Assis‐
tant can be cancelled manually:
"Cancel"
Cancelling the Reversing Assistant
automatically
The system automatically cancels in situations
such as the following:
▷ If the driver grips the steering wheel or steers
the vehicle.
▷ When shifting from reverse gear to another
selector lever position.
▷ During activation or intervention by driver as‐
sistance systems.
▷ After an extended period of time when the
vehicle is stationary.
▷ When exiting the stored lane when reversing,
such as with maximum steering wheel angle.
▷ When the display on the control display is fa‐
ded due to messages, for example due to in‐
coming calls.
▷ In case of a slippery surface.
▷ When the vehicle is rolling, for example on a
slope.
▷ In case of changed environmental factors.
▷ At speeds over approximately 10 km/h,
6 mph.
System limits
▷ The maximum speed when driving in reverse
is limited to approx. 10 km/h/6 mph.
A warning occurs at a speed of approx.
7 km/h/4 mph.
Seite 275
Parking
CONTROLS
275
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
