BMW iX User Manual

▷ A selection menu is displayed on the control
display to select the parking method.
▷ When the icon is green, the parking ma‐
noeuvre is active. The system takes control
of the parking manoeuvre.
Parking manoeuvre
When the Parking Manoeuvre Assistant is active,
the parking manoeuvre is displayed on the con‐
trol display.
1. Press the button.
2. "Driver assistance"
3. "Parking"
4. "Show parking spaces/driving paths"
Turning the acoustic signal on/off
The acoustic signal for suitable parking spaces
can be turned on and off.
1.
Press the button.
2. "Driver assistance"
3. "Parking"
4. "Sound when available"
Acoustic signal of the Park Distance
Control PDC
Depending on the national-market version, an in‐
termittent tone of the Park Distance Control PDC
will sound during an automatic parking manoeu‐
vre.
A continuous tone will sound when the distance
to a detected object is less than approx. 20 cm,
8 in.
Parking with Park Assist
1.
Press the button.
Parking space search is activated.
2. Drive past the line of parked vehicles at a
speed up to approximately 35 km/h, 22 mph
and at a maximum distance of 1.5 m, 5 ft.
The status of the parking space search and
possible parking spaces are displayed on the
control display and in the instrument cluster.
3. On the control display: select a parking
method for one of the parking spaces that are
offered. If applicable, another parking space
can also be selected afterwards.
In the instrument cluster: select suggested
parking method with the knurled wheel on
the steering wheel.
The system takes control of the parking ma‐
noeuvre.
4. Follow the instructions on the control display
or in the instrument cluster.
The speed can be reduced with the brake.
Other interventions will cancel the system.
When parking manoeuvre is complete, selec‐
tor lever position P is engaged.
The end of the parking manoeuvre is indica‐
ted on the control display and in the instru‐
ment cluster.
5. Adjust the parking position yourself if neces‐
sary.
Leaving parking space with Park
Assist
1.
Switch on drive-ready state.
2. Press the button when the vehicle is
stationary.
3. On the control display: select the desired
parking method.
In the instrument cluster: select suggested
parking method with the knurled wheel on
the steering wheel.
4. Follow the instructions on the control display
or in the instrument cluster. The system
takes over the manoeuvre.
Seite 269
Parking
CONTROLS
269
Online Edition for Part no. 01405A38CB9 - VI/21

BMW iX Specifications

General

Brand	BMW
Model	iX
Category	Automobile
Language	English