8.10 Control initial setting level (l.1)
8-41
Setting data
8.10 Control initial setting level (l.1)
This level contains initial settings for control such as the control method, as well as the output type, SP
limit, control mode, direct/reverse action, and closed/floating settings.
Adjustment
level
Operation level
L key Less
than 1 second
L key
1 second or
more
L key
3 seconds
or more
Adjustment 2
level
L key Less
than 1 second
PID setting
level
Bank setting
level
25.0
0.0
0.0
Control in progress
L key Less
than 1 second
L key less than 1 second
L key Less
than 1 second
L key Less
than 1 second
Approximation
setting
level
Control initial setting
level
Input initial setting
level
L key Less
than 1 second
Control initial setting
2 level
L key Less
than 1 second
Display adjustment
level
Alarm setting
level
L key Less
than 1 second
L key less than 1 second
L key Less
than 1 second
L key Less
than 1 second
Communication
setting
level
Control stops.
Control stop
l. adj
l. ad2
l. bnk
l. pid
l. tec
l. 0
l. 1
l. 2
l. 3
l. 4
l. 5
Power on
co1-t
co3-t
co4-t
1
1
1
1
M
M
M
M
co2-t
CO1-T:
Linear current output 1 type
0-20mA(0)/4-20mA(1)
CO2-T:
Linear current output 2 type
0-20mA(0)/4-20mA(1)
CO3-T:
Linear current output 3 type
0 - 20mA(0)/4 - 20mA(1)
CO4-T:
Linear current output 4 type
0 - 20mA(0)/4 - 20mA(1)
l.1
o1-t
0
M
o3-t
O1-T: Output 1 type
Pulse voltage output (O)/
Linear current output (1)
O3-T: Output 3 type
Puise voltage output (O)/
Linear current output (1)
M
0
sl-h
sl-l
ore
1300.0
M
M
M
M
M
clfl
SL-H: SP lower limit
*2
OREV: Forward/reverse operation
Reverse: OR-R / Forward: OR-D
SL-H: SP upper limit
*1
CLFL: Closed/Floating
Floating: FLOAT/
Closed: CLOSE
-200.0
∗1 Temperature: SP lower limit + 1 to upper limit
of sensor setting range
Analog :SP lower limit + 1 to lesser of 99999 or
display value equivalent of input upper limit
∗2 Temperature: Lower limit of sensor setting range
to SP upper limit - 1
Analog :
Larger of -19999 and display value equivalent
of input lower value to SP upper limit -1
∗3 1/4 input :Standard (0) / heating or cooling (1)
Standard (0) / heating or cooling (1)
Standard with remote SP (2) /
Heating or cooling (3) with remote SP /
Proportion (4) / Cascade standard (5) /
Cascade heating or cooling (6)
or-r
float
mode
MODE: Control mode
*3
0
M
CH
CH
CH
CH
Control initial setting level