9 eSieFusion Imaging
9 - 8 Instructions for Use
Loading the Reference Data
You must import reference data to the local database (system hard drive) before you load reference
data to an exam.
See also: Importing Patient Data, Patient Data Management, Chapter C2, Features and Applications
Reference
To load reference data to eSieFusion:
Note: If you manually entered the patient name, patient ID, date of birth, and gender on the patient
registration form, the entries are case sensitive and must match the corresponding information for the
reference data.
1. Click Tree on the View menu in the patient browser and then select and register the
patient, if necessary.
2. Activate eSieFusion.
3. Double-click the series for the reference data to load.
When the data is loaded, the system closes the patient browser and displays the reference
data on the image screen.
eSieFusion Functions
eSieFusion provides tools for the following primary functions.
Real-time imaging
Use the Scan tools to acquire images, optimize images, make measurements,
or perform interventional procedures.
See also: Real-time Imaging, p. 9-14
Planning data
Use the Plan tools to identify the anatomy of interest and draw planned
needle paths for an interventional procedure.
See also: Planning Data, p. 9-17
Image alignment
Use the Fuse tools to initialize and adjust the alignment of the ultrasound
image and reference data.
See also: Image Alignment, p. 9-21
To Next Page
Loading...
Need help?
General