To Next Page

To Previous Page

B-63

Catalyst 3750-X and 3560-X Switch Command Reference

OL-29704-01

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform matm

Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent

MAC address management. Use the no form of this command to disable debugging.

debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}

no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |

warnings}

Syntax Description

Defaults Debugging is disabled.

Command Modes Privileged EXEC

Command History

Usage Guidelines The undebug platform matm command is the same as the no debug platform matm command.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

Related Commands

aging Display MAC address aging debug messages.

all Display all platform MAC address management event debug messages.

ec-aging Display EtherChannel address aging-related debug messages.

errors Display MAC address management error messages.

learning Display MAC address management address-learning debug messages.

rpc Display MAC address management remote procedure call (RPC) related debug

messages.

secure-address Display MAC address management secure address learning debug messages.

warning Display MAC address management warning messages.

Release Modification

12.2(53)SE2 This command was introduced.

Command Description

debug matm Displays information about platform-independent MAC address management.

show debugging Displays information about the types of debugging that are enabled.

Cisco Catalyst 3750-X Command Reference

Other manuals for Cisco Catalyst 3750-X