Name: Cisco Catalyst 3750-X
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2-916

Catalyst 3750-X and 3560-X Switch Command Reference

OL-29704-01

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

switch provision

Use the switch provision global configuration command on the stack master to provision (to supply a

configuration to) a new switch before it joins the switch stack. Use the no form of this command to delete

all configuration information associated with the removed switch (a stack member that has left the

stack).

switch stack-member-number provision type

no switch stack-member-number provision

Note This command is supported only on Catalyst 3750-X switches.

Syntax Description

Defaults The switch is not provisioned.

Command Modes Global configuration

Command History

Usage Guidelines To avoid receiving an error message, you must remove the specified switch from the switch stack before

using the no form of this command to delete a provisioned configuration.

To change the switch type, you must also remove the specified switch from the switch stack. You can

change the stack member number of a provisioned switch that is physically present in the switch stack

if you do not also change the switch type.

If the switch type of the provisioned switch does not match the switch type in the provisioned

configuration on the stack, the switch stack applies the default configuration to the provisioned switch

and adds it to the stack. The switch stack displays a message when it applies the default configuration.

Provisioned information appears in the running configuration of the switch stack. When you enter the

copy running-config startup-config privileged EXEC command, the provisioned configuration is saved

in the startup configuration file of the switch stack.

stack-member-number Specify the stack member number. The range is 1 to 9.

provision type Specify the switch type of the new switch before it joins the stack.

For type, enter the model number of a supported switch that is listed in

the command-line help strings.

Release Modification

12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Command Reference

Other manuals for Cisco Catalyst 3750-X