2-732
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mac address-table interface
show mac address-table interface
Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
show mac address-table interface interface-id [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show mac address-table interface command:
Switch> show mac address-table interface gigabitethernet6/0/2
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0030.b635.7862 DYNAMIC Gi6/0/2
1 00b0.6496.2741 DYNAMIC Gi6/0/2
Total Mac Addresses for this criterion: 2
Related Commands
interface-id Specify an interface type; valid interfaces include physical ports and port
channels.
vlan vlan-id (Optional) Display entries for a specific VLAN; the range is 1 to 4094.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or
the specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table notification Displays the MAC address notification settings for all
interfaces or the specified interface.
show mac address-table static Displays static MAC address table entries only.
show mac address-table vlan Displays the MAC address table information for the
specified VLAN.
To Next Page
Loading...
Need help?
General