Cisco Catalyst 3750-X Command Reference

2-204
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
dot1x test eapol-capable
dot1x test eapol-capable
Use the dot1x test eapol-capable privileged EXEC command on the switch stack or on a standalone
switch to monitor IEEE 802.1x activity on all the switch ports and to display information about the
devices that are connected to the ports that support IEEE 802.1x.
dot1x test eapol-capable [interface interface-id]
Syntax Description
Defaults There is no default setting.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to test the IEEE 802.1x capability of the devices connected to all ports or to specific
ports on a switch.
There is not a no form of this command.
Examples This example shows how to enable the IEEE 802.1x readiness check on a switch to query a port. It also
shows the response received from the queried port verifying that the device connected to it is
IEEE 802.1x-capable:
switch# dot1x test eapol-capable interface gigabitethernet1/0/13
DOT1X_PORT_EAPOL_CAPABLE:DOT1X: MAC 00-01-02-4b-f1-a3 on gigabitethernet1/0/13 is EAPOL
capable
Related Commands
interface interface-id (Optional) Port to be queried.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
dot1x test timeout timeout Configures the timeout used to wait for EAPOL response to
an IEEE 802.1x readiness query.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English