Cisco Catalyst 3750-X Command Reference

2-133
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
cluster run
cluster run
Use the cluster run global configuration command to enable clustering on a switch. Use the no form of
this command to disable clustering on a switch.
cluster run
no cluster run
Syntax Description This command has no arguments or keywords.
Defaults Clustering is enabled on all switches.
Command Modes Global configuration
Command History
Usage Guidelines When you enter the no cluster run command on a cluster command switch or cluster command switch
stack, the cluster command switch is disabled. Clustering is disabled, and the switch cannot become a
candidate switch.
When you enter the no cluster run command on a cluster member switch, it is removed from the cluster.
Clustering is disabled, and the switch cannot become a candidate switch.
When you enter the no cluster run command on a switch that is not part of a cluster, clustering is
disabled on this switch. This switch cannot then become a candidate switch.
Examples This example shows how to disable clustering on the cluster command switch:
Switch(config)# no cluster run
You can verify your setting by entering the show cluster privileged EXEC command.
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show cluster Displays the cluster status and a summary of the cluster to which the switch
belongs.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English