Cisco Catalyst 3750-X Command Reference

2-98
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear errdisable interface
clear errdisable interface
Use the clear errdisable interface privileged EXEC command on the switch stack or on a standalone
switch to re-enable a VLAN that was error disabled.
clear errdisable interface interface-id vlan [vlan-list]
Syntax Description
Command Default No default is defined
Command Modes Privileged EXEC
Command History
Usage Guidelines You can re-enable a port by using the shutdown and no shutdown interface configuration commands,
or you can clear error disable for VLANs by using the clear errdisable interface command.
Examples This example shows how to re-enable all VLANs that were error-disabled on Gigabit Ethernet port 4/0/2.
Switch# clear errdisable interface gigabitethernet4/0/2 vlan
Related Commands
vlan list (Optional) Specify a list of VLANs to be re-enabled. If a vlan-list is not
specified, then all VLANs are re-enabled.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
errdisable detect cause Enables error-disabled detection for a specific cause or all causes.
errdisable recovery Configures the recovery mechanism variables.
show errdisable detect Displays error-disabled detection status.
show errdisable recovery Display error-disabled recovery timer information.
show interfaces status
err-disabled
Displays interface status of a list of interfaces in error-disabled state.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English