Cisco Catalyst 3750-X Command Reference

2-94
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
class-map
class-map
Use the class-map global configuration command on the switch stack or on a standalone switch to create
a class map to be used for matching packets to the class whose name you specify and to enter class-map
configuration mode. Use the no form of this command to delete an existing class map and to return to
global configuration mode.
class-map [match-all | match-any] class-map-name
no class-map [match-all | match-any] class-map-name
Syntax Description
Defaults No class maps are defined.
If neither the match-all or match-any keyword is specified, the default is match-all.
Command Modes Global configuration
Command History
Usage Guidelines Use this command to specify the name of the class for which you want to create or modify class-map
match criteria and to enter class-map configuration mode.
The class-map command and its subcommands are used to define packet classification, marking, and
aggregate policing as part of a globally named service policy applied on a per-port basis.
After you are in quality of service (QoS) class-map configuration mode, these configuration commands
are available:
• description: describes the class map (up to 200 characters). The show class-map privileged EXEC
command displays the description and the name of the class-map.
• exit: exits from QoS class-map configuration mode.
• match: configures classification criteria. For more information, see the match (class-map
configuration) command.
• no: removes a match statement from a class map.
• rename: renames the current class map. If you rename a class map with a name that is already used,
the message
A class-map with this name already exists appears.
match-all (Optional) Perform a logical-AND of all matching statements under this class
map. All criteria in the class map must be matched.
match-any (Optional) Perform a logical-OR of the matching statements under this class
map. One or more criteria must be matched.
class-map-name Name of the class map.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English