2-583
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show cluster candidates
show cluster candidates
Use the show cluster candidates privileged EXEC command on a switch stack or on a cluster command
switch to display a list of candidate switches.
show cluster candidates [detail | mac-address H.H.H.]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines This command is available only on the cluster command switch stack or cluster command switch.
If the switch is not a cluster command switch, the command displays an empty line at the prompt.
The SN in the display means switch member number. If E appears in the SN column, it means that the
switch is discovered through extended discovery. If E does not appear in the SN column, it means that
the switch member number is the upstream neighbor of the candidate switch. The hop count is the
number of devices the candidate is from the cluster command switch.
Examples This is an example of output from the show cluster candidates command:
Switch> show cluster candidates
|---Upstream---|
MAC Address Name Device Type PortIf FEC Hops SN PortIf FEC
00d0.7961.c4c0 StLouis-2 WS-C3750E-24TD Gi6/0/1 2 1 Fa0/11
00d0.bbf5.e900 ldf-dist-128 WS-C3524-XL Fa0/7 1 0 Fa0/24
00e0.1e7e.be80 1900_Switch 1900 3 0 1 0 Fa0/11
00e0.1e9f.7a00 Surfers-24 WS-C2924-XL Fa0/5 1 0 Fa0/3
00e0.1e9f.8c00 Surfers-12-2 WS-C2912-XL Fa0/4 1 0 Fa0/7
00e0.1e9f.8c40 Surfers-12-1 WS-C2912-XL Fa0/1 1 0 Fa0/9
detail (Optional) Display detailed information for all candidates.
mac-address H.H.H. (Optional) MAC address of the cluster candidate.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General