2-585
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show cluster members
show cluster members
Use the show cluster members privileged EXEC command on a switch stack or on a cluster command
switch to display information about the cluster members.
show cluster members [n | detail]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is available only on the cluster command switch stack or cluster command switch.
If the cluster has no members, this command displays an empty line at the prompt.
Examples This is an example of output from the show cluster members command. The SN in the display means
switch number.
Switch# show cluster members
|---Upstream---|
SN MAC Address Name PortIf FEC Hops SN PortIf FEC State
0 0002.4b29.2e00 StLouis1 0 Up (Cmdr)
1 0030.946c.d740 tal-switch-1 Fa0/13 1 0 Gi0/1 Up
2 0002.b922.7180 nms-2820 10 0 2 1 Fa0/18 Up
3 0002.4b29.4400 SanJuan2 Gi0/1 2 1 Fa0/11 Up
4 0002.4b28.c480 GenieTest Gi0/2 2 1 Fa0/9 Up
This is an example of output from the show cluster members for cluster member 3:
Switch# show cluster members 3
Device 'SanJuan2' with member number 3
Device type: cisco WS-C3750E-24TD-S
MAC address: 0002.4b29.4400
Upstream MAC address: 0030.946c.d740 (Cluster member 1)
Local port: Gi6/0/1 FEC number:
Upstream port: GI6/0/11 FEC Number:
Hops from command device: 2
This is an example of output from the show cluster members detail command:
Switch# show cluster members detail
Device 'StLouis1' with member number 0 (Command Switch)
Device type: cisco WS-C3750E-24TD-S
MAC address: 0002.4b29.2e00
Upstream MAC address:
Local port: FEC number:
Upstream port: FEC Number:
n (Optional) Number that identifies a cluster member. The range is 0 to 15.
detail (Optional) Display detailed information for all cluster members.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General