Cisco Catalyst 3750-X Command Reference

2-793
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show rep topology
show rep topology
To display Resilient Ethernet Protocol (REP) topology information for a segment or for all segments,
including the primary and secondary edge ports in the segment, use the show rep topology user EXEC
command
show rep topology [segment segment_id] [archive] [detail]
Syntax Description
Command Modes User EXEC
Command History
Examples This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1 Pri Alt
sw3_multseg_3560 Gi1/1 Open
sw3_multseg_3560 Gi1/2 Alt
sw4_multseg_3560 Gi1/1 Open
sw4_multseg_3560 Gi1/2 Open
sw5_multseg_3560 Gi1/1 Open
sw5_multseg_3560 Gi1/2 Open
sw2_multseg_3750 Gi1/1/2 Open
sw2_multseg_3750 Gi1/1/1 Open
sw1_multseg_3750 Gi1/1/2 Sec Open
segment
segment-id
(Optional) Displays REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Displays the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Displays detailed REP topology information.
Release Modification
15.0(2)SE This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English