Cisco Catalyst 3750-X Command Reference

C-21
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform layer4op
show platform layer4op
Use the show platform layer4op privileged EXEC command to display platform-dependent Layer 4
operator information.
show platform layer4op {acl | pacl [port-asic] | qos [port-asic]} {and-or | map | or-and | vcu}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
acl Display access control list (ACL) Layer 4 operators information.
pacl [port-asic] Display port ACL Layer 4 operators information. The keyword has this meaning:
• port-asic—(Optional) Port ASIC number.
qos [port-asic] Display quality of service (QoS) Layer 4 operators information. The keyword has
this meaning:
• port-asic—(Optional) QoS port ASIC number.
and-or Display AND-OR registers information.
map Display select map information.
or-and Display OR-AND registers information.
vcu Display value compare unit (VCU) register information.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English