To Next Page

To Previous Page

C-18

Catalyst 3750-X and 3560-X Switch Command Reference

OL-29704-01

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform ipv6 mld snooping

Use the show platform ipv6 mld snooping privileged EXEC command to display platform-dependent

IPv6 MLD snooping information.

show platform ipv6 unicast {all | control [di] | counters | flood [vlan vlan_id | group ip-address

| hardware] | retry [local | remote [count]

Syntax Description

Command Modes Privileged EXEC

Command History

Usage Guidelines You should use this command only when you are working directly with a technical support representative

while troubleshooting a problem. Do not use this command unless a technical support representative asks

you to do so.

all Display all MLD snooping platform IP multicast information.

control Display MLD snooping control information.

di (Optional) Display MLD snooping control entries.

counters Display MLD snooping counters.

flood Display MLD snooping flood information.

vlan vlan_id (Optional) Display MLD snooping flood information for the specified

VLAN. The range is 1 to 4094.

group ip-address Display MLD snooping IP multicast group information for the group with the

specified IP address.

hardware Display MLD snooping hardware IP multicast information

retry [local | remote

[count]

Display MLD snooping retry information:

• (Optional) local—Display local retry entries.

• (Optional) remote—Display remote retry entries.

• (Optional) count—Display the retry count.

Release Modification

12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Command Reference

Other manuals for Cisco Catalyst 3750-X