Cisco Catalyst 3750-X Command Reference

2-600
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show controllers ethernet phy macsec
show controllers ethernet phy macsec
Use the show controllers ethernet phy macsec privileged EXEC command to display the internal
Media Access Control Security (MACsec) counters or registers on the switch or the specified interface.
show controllers ethernet [interface-id] phy macsec {counters | registers}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The displayed information is useful s for Cisco technical support representatives troubleshooting the
switch.
Examples This is an example output from the show controllers ethernet phy macsec counters command:
Switch# show controllers ethernet g1/0/1 phy macsec counters
GigabitEthernet1/0/1 (gpn: 1, port-number: 1)
-----------------------------------------------------------
========== Active RX SA ==========
ILU Entry : 1
SCI : 0x1B2140EC4C0000
AN : 0x0000
NextPN : 0x0013
Decrypt Key : 0x1E902BE3AF08549BAC995474C5F55526
---------- RX SA Stats ----------
IGR_HIT : 0xE
IGR_OK : 0xE
IGR_UNCHK : 0x0
IGR_DELAY : 0x0
IGR_LATE : 0x0
IGR_INVLD : 0x0
IGR_NOTVLD : 0x0
========== Active TX SA ==========
ELU Entry : 2
SCI : 0x22BDCF9A010002
AN : 0x0000
NextPN : 0x0022
Encrypt Key : 0x1E902BE3AF08549BAC995474C5F55526
interface-id (Optional) The physical interface.
counters Displays the status of the internal counters on the switch physical layer device
(PHY) for the device or the interface.
registers Displays the status of the internal registers on the switch PHY for the device or
the interface.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English