To Next Page

To Previous Page

B-98

Catalyst 3750-X and 3560-X Switch Command Reference

OL-29704-01

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug sw-vlan

Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.

Use the no form of this command to disable debugging.

debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping |

notification | packets | redundancy | registries | vtp}

no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping

| notification | packets | redundancy | registries | vtp}

Syntax Description

Defaults Debugging is disabled.

Command Modes Privileged EXEC

Command History

badpmcookies Display debug messages for VLAN manager incidents of bad port manager

cookies.

cfg-vlan {bootup | cli} Display config-vlan debug messages. The keywords have these meanings:

• bootup—Display messages when the switch is booting up.

• cli—Display messages when the command-line interface (CLI) is in

config-vlan mode.

events Display debug messages for VLAN manager events.

ifs See the debug sw-vlan ifs command.

management Display debug messages for VLAN manager management of internal

VLANs.

mapping Display debug messages for VLAN mapping.

notification See the debug sw-vlan notification command.

packets Display debug messages for packet handling and encapsulation processes.

redundancy Display debug messages for VTP VLAN redundancy.

registries Display debug messages for VLAN manager registries.

vtp See the debug sw-vlan vtp command.

Release Modification

12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Command Reference

Other manuals for Cisco Catalyst 3750-X