Cisco Catalyst 3750-X Command Reference

C-4
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform configuration
show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
show platform configuration {config-output | default | running | startup}
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
config-output Display the output of the last auto-configuration application.
default Display whether or not the system is running the default configuration.
running Display a snapshot of the backed-up running configuration on the local
switch.
startup Display a snapshot of the backed-up startup configuration on the local switch.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English