2-686
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show ip source binding
show ip source binding
Use the show ip source binding user EXEC command to display the IP source bindings on the switch.
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [interface
interface-id] [vlan vlan-id]
Note This command is available only if your switch is running the IP services feature set.
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines The show ip source binding command output shows the dynamically and statically configured bindings
in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC
command to display only the dynamically configured bindings.
Examples This is an example of output from the show ip source binding command:
Switch> show ip source binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
-------------- --------------- ---------- ------------- ---- --------------------
00:00:00:0A:00:0B 11.0.0.1 infinite static 10 GigabitEthernet1/0/1
00:00:00:0A:00:0A 11.0.0.2 10000 dhcp-snooping 10 GigabitEthernet1/0/1
Related Commands
ip-address (Optional) Display IP source bindings for a specific IP address.
mac-address (Optional) Display IP source bindings for a specific MAC address.
dhcp-snooping (Optional) Display IP source bindings that were learned by DHCP
snooping.
static (Optional) Display static IP source bindings.
interface interface-id (Optional) Display IP source bindings on a specific interface.
vlan vlan-id (Optional) Display IP source bindings on a specific VLAN.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
ip dhcp snooping binding Configures the DHCP snooping binding database.
ip source binding Configures static IP source bindings on the switch.
To Next Page
Loading...
Need help?
General