C-22
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform mac-address-table
show platform mac-address-table
Use the show platform mac-address-table privileged EXEC command to display platform-dependent
MAC address table information.
show platform mac-address-table [aging-array | hash-table | mac-address mac-address] [vlan
vlan-id]]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
aging-array (Optional) Display the MAC address table aging array.
hash-table (Optional) Display the MAC address table hash table.
mac-address mac-address (Optional) Display the MAC address table MAC address information,
where mac-address is the 48-bit hardware address.
vlan vlan-id (Optional) Display information for the specified VLAN. The range is 1
to 4094.
Release Modification
12.2(53)SE2 This command was introduced.